Walkera QRX350 Pro Quadcopter

Now I have just finished the Walkera QRX360 Pro Low Voltage Sensor Modification (LVC Mod).
But I did this modification my way without having to cut wires and resolder them together and shrink wrap them.



The Walkera QRX350 Pro original software has a rather nasty bug in it, and some quadcopters drop from the sky unless they have been modified using Mission Planner or the more permanent internal LVC Mod, which entails the bridging of two wires to create a permanent short circuit so the power sensor.

Next was the landing gear being to short for the Camera Gimbal. (Kept hitting the ground)
So I finished buying an upgraded set with the longer legs

Another simple thing I did was to replace the metal mounting gear with the Walkera QRX350 Pro Plastic 2D Quick Release Mount.

I decided I needed to see what the camera was seeing so I set up and Mount the 32 Channel FPV Camera.

My Camera is an SJCam 4000 which needed an easy modification, to be balanced properly in the G-2D gimbal.

I was having problems with the rubber feet popping of on landings, and I used glue to secure them in place.